Remoter fusion4/7/2023 ![]() Press control and O and then enter to save, followed by control and X to exit. The following settings worked for the BT Homehub version 3. This launches nano which is a basic text editor – the following settings will depend on your Router – most routers will have a configuration page which will give you this information if you visit their configuration page – usually found on your network by typing 192.168.1.1 into a browser. In the prompt type: cd /etc/network sudo nano interfaces Now you need to change your Pi from having a dynamic IP address (given to it by the router every time it reboots) to a static IP address which will stay the same. Then connect – you might get a warning message (just accept) and then you should be seeing the Linux prompt. number then choose Manual – leave the SSH Port setting at 22 and in SSH Username enter your Pi username and SSH Password your Pi password. In the box that says SSH Hostname enter your Pi’s IP address which you found out above: 192.168.1. To connect to your Raspberry Pi with Remoter Fusion, click on discovery list -> Add Session Manually. ![]() Next you can connect to your Pi using an SSH client – I’ve been using Remoter Fusion on the iPad (other SSH apps are available but I was using Remoter for something else) note that you will need to purchase SSH support in app which adds £5 to it’s price. ![]() number (I’ll use this notation to refer to this value in the guide) This will give you some information about how the Pi is connecting to the network – make a note of the inet addr – usually 192.168.1. Now find your Pi’s IP address – in the terminal type: ifconfig We’ll be using SSH to control the Pi remotely. Make sure you change the default Pi password, and enable SSH in the menu. On it’s first boot the Pi will run the config app – if you’ve already run your Pi before you can restart the config app by typing the following into the console: sudo raspi-config This would also work with a wireless connection, but ethernet is a bit simpler, more stable and means the Pi will run happily off a low powered USB adapter (e.g. Next step is to boot up the Pi with a screen and keyboard attached, and connected to your home network with an Ethernet cable. Setting up your Raspberry Pi for remote control by iPad Nice conversation piece for geeky dinner partiesįirst step is to prepare an SD card for your Pi – I’ve been using the default Raspbian. Plus you could combine this functionality with a fileserver or an airplay speaker for a bit of extra usefulness. You could run this software on any PC attached to your network – but with the Pi’s low power consumption (3.5 watts) you can afford to leave it on all the time. On my computer I find using Adblock plus a handy way to speed up surfing and hide invasive pop-up ads.Īnnoyingly you can’t install Adblock on an iPad without jailbreaking it – and I’ve yet to come across a way of installing it on Android devices easily without requiring root access.įortunately there’s an easy way to install Privoxy on a Raspberry Pi that can block adverts (and do a few other things as well) and that works seamlessly on iOS and more or less anything you attach to your network. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |